11
PHOTOS OF GENERAL INTEREST (NOT TOOLS OR SHOP RELATED) / Re: Meet the newest member to OldCarGuy's family
« Last post by Uncle Buck on May 06, 2024, 09:15:26 PM »Good lookin poochies OCG!
Apparently a faulty rear main engine seal is causing the fuel trims to become very unstable and the car's developed a substantial miss. The smoke machine is the only way to track this apparently common VW problem down.Imagine telling the customer that rough running is from a bad rear main seal.
You could have sprayed this engine with brake clean all day and the numbers would not have changed.
I've never heard of a smoke machine used for an intake/vacuum leak.Intake/vacuum leak is a very common use for a smoke machine.
My use was limited to EVAP leaks which can be very hard to find.
On a side note I still cannot get used to mechanics wearing watches and rings while working on vehicles. My military training coming through.
I'm still old school and use carb cleaner...
Sent from my twisted mind of the mudman
I've never heard of a smoke machine used for an intake/vacuum leak.Intake/vacuum leak is a very common use for a smoke machine.
My use was limited to EVAP leaks which can be very hard to find.
On a side note I still cannot get used to mechanics wearing watches and rings while working on vehicles. My military training coming through.
...Tools from the following countries I don't trust to be high quality and accurate. (I could be wrong, but don't know) Russia, Poland, Ukraine, and of course China.