Garage Gazette
TOOLS AND THE SHOP => MACHINE SHOP => Topic started by: m_fumich on August 28, 2020, 09:48:03 PM
-
Does anyone have any experience with the HF sheet metal brake? Should I avoid it? What would you recommend as an alternative?
Sent from my iPhone using Tapatalk
-
Someone who actually knows how to use one can do what they need to with it even if it takes a bit more work and setup. Someone who knows little more than they want a sheet metal brake can probably only make scrap with even the best brake out there.
-
Search Metal Brake, they are very easy to make. Don't require very much in the way of materials.
Can be made portable, using "C" clamp mount to work bench.
Rigidity, determines the sharpness of the bend, & sheet metal thickness to be bent.
If sharp bends are not a big deal, you could even make one using heavy wood
Betting some will post some home builds for this ...I know they are out there..
-
Search Metal Brake, they are very easy to make. Don't require very much in the way of materials.
Can be made portable, using "C" clamp mount to work bench.
Rigidity, determines the sharpness of the bend, & sheet metal thickness to be bent.
If sharp bends are not a big deal, you could even make one using heavy wood
Betting some will post some home builds for this ...I know they are out there..
Fortunately, I don’t have an immediate need for one. I’m just researching for now. That’s good because, while I have a welder, I don’t know how to weld yet. I think a 24” portable brake would suit my limited needs. I’ll look for some plans. Maybe there’s a wood/metal composite plan out there.
Sent from my iPhone using Tapatalk
-
I have one and it works... OKish. You can do really simple jobs on it, but it doesn't clamp real well so you need to use an additional c-clamp or two in the center of it. Other than that, it is not too bad, just limited.
-
Does anyone have any experience with the HF sheet metal brake? Should I avoid it?
Have you checked out online reviews on the HF website? 177 are there for viewing. Quite detailed really.
-
Home made from printed plans.. tight bend .030
-
Wow pep, nice bend on that sheet stock. What gauge is that material?
-
Someone who actually knows how to use one can do what they need to with it even if it takes a bit more work and setup. Someone who knows little more than they want a sheet metal brake can probably only make scrap with even the best brake out there.
I'm one of those that could really make a mess :))
Sent from my E6910 using Tapatalk
-
Wow pep, nice bend on that sheet stock. What gauge is that material?
18 gage, pictured, will bend 16 - 24