Garage Gazette
TOOLS AND THE SHOP => GENERAL TOOL AND MACHINE DISCUSSION => Topic started by: jabberwoki on March 09, 2019, 06:41:27 PM
-
Got the ex military 7 ton high jack stands for $130 for the set and the Proto puller arms for a buck, couldn`t pass them up for that. I don`t need them so if anybody's missing some let me know.
-
I do have some arms but could use a few more. If nobody else needs them I'll take them. I have a 8" non sparking adjustable to trade.
-
Well Ken, I`m really looking for the bloke that has only 1 arm or just has the bar with no arms.'
Sorry I should have been more clear.
-
Went back down today and snagged this 33 inch Mac middle box that was on the welding cart for $75.
The draws were shut and the guy didn`t know what was in them .
I got the dusty bastard home and got the draws open and found the lock with was nice.
The rest was body shop junk but there was a few drill bits in there and 2 pullers.
It's got a couple of dents but nothing major .
Seeing as Galaxy has been slacking on finding me a Wright version of this box I`ll have to slum it with a Mac.
The Big Wilton was $200.. no I didn't get it.
-
Went back down today and snagged this 33 inch Mac middle box that was on the welding cart for $75.
The draws were shut and the guy didn`t know what was in them .
I got the dusty bastard home and got the draws open and found the lock with was nice.
The rest was body shop junk but there was a few drill bits in there and 2 pullers.
It's got a couple of dents but nothing major .
Seeing as Galaxy has been slacking on finding me a Wright version of this box I`ll have to slum it with a Mac.
The Big Wilton was $200.. no I didn't get it.
Oooh, Galaxy, are you gonna take that sitting down? :))
-
Went back down today and snagged this 33 inch Mac middle box that was on the welding cart for $75.
The draws were shut and the guy didn`t know what was in them .
I got the dusty bastard home and got the draws open and found the lock with was nice.
The rest was body shop junk but there was a few drill bits in there and 2 pullers.
It's got a couple of dents but nothing major .
Seeing as Galaxy has been slacking on finding me a Wright version of this box I`ll have to slum it with a Mac.
The Big Wilton was $200.. no I didn't get it.
Oooh, Galaxy, are you gonna take that sitting down? :))
No problem, I'm used to those Aussies mouthing off! :))
-
Looks like a nice blind bearing puller in the top drawer
-
Hey Jabber, are you going to be at the P'up swap this weekend? I am trying to make it on Sunday. Work permitting and the creek don't rise.
-
Yep but really this swap coming up is really lame, not sure it`s worth the trip on it`s own.
Your going to Portland thou right?
-
I plan to be coming through Seattle, so I figuered I might as well go. I plan to be at the Portland show, bought a 3-wheel bike to ride around the track.
-
Ok I'll pm you.