Author Topic: Snap-on question  (Read 1987 times)

Offline coolmercury

  • Hero Member
  • *****
  • Posts: 621
Snap-on question
« on: July 15, 2020, 06:41:35 PM »
These are all Snap-on midget ratchets about 4 1/4" long.  In each picture from the top they are M 70 M 9/32" drive, M 70 M 1/4" drive and lastly at the bottom PM 70 M 1/4" drive.  I have had the first two for a long time and only picked up the bottom one at auction in a box lot.  If you look closely at the bottom two which are both 1/4" drive you will notice the case walls are thicker on the PM 70 M which is at the bottom, and it also says USA which the other two do not.  Anyone want to comment on this????

Offline hickory n Steel

  • Hero Member
  • *****
  • Posts: 3286
Re: Snap-on question
« Reply #1 on: July 15, 2020, 09:13:07 PM »
I would assume age difference.
I've seen minor differences like this over time with many different brands of tools.
Always lookin' to learn

Online J.A.F.E.

  • Resident Alien
  • Global Moderator
  • Hero Member
  • *****
  • Posts: 2611
Re: Snap-on question
« Reply #2 on: July 15, 2020, 10:11:47 PM »
Can't offer much with the markings but the heads were shaped and finished by hand and they do vary. I have a GM70 where one side is really thick and the other pretty thin.
People who confuse etymology and entomology bug me in ways I can’t put into words.