Garage Gazette
BUYING/SELLING/TRADING/VENDORS AND BUSINESSES => MEMBERS ONLY, BUY/SELL/TRADE => Topic started by: stokester on November 03, 2018, 05:53:29 PM
-
Yea, it's a special one for my motorcycle and it has to stand proud by .5mm so it does not get driven flush with the engine case.
Any machinists here who could make one from nylon, plastic or even hardwood? I've been told the factory tool was nylon or plastic and some have made them out of hardwood on a lathe.
I have the drawing specifications.
Please PM me if you may be able to make one.
-
Can't find a socket to fit?
Sent from my XT1710-02 using Tapatalk
-
Can't find a socket to fit?
Sent from my XT1710-02 using Tapatalk
Nope, not one that will drive it to .5mm of the engine case.
-
Without knowing more specifics, seems that a .5mm washer on the outside of the seal would offer that stop to drive against.
-
Without knowing more specifics, seems that a .5mm washer on the outside of the seal would offer that stop to drive against.
Yea, that's my plan if I can't get a driver.
-
wull I got lathes.. wood, metal
Got plastic, steel, hard rubber, hard wood......... whatever
what do you have to trade?
yours scott
-
wull I got lathes.. wood, metal
Got plastic, steel, hard rubber, hard wood......... whatever
what do you have to trade?
yours scott
Thanks Scott
Not sure what you need, I'm willing to pay a reasonable price, trade work or tools. The seal in question is over $40 and if accidentally driven flush to the case it may leak or be ruined if I remove it.
I'm a retired AF electronics tech and auto mechanic that repairs classic auto radios specializing in air-cooled VWs.
Look for a PM with the diagram.
-
wull I got lathes.. wood, metal
Got plastic, steel, hard rubber, hard wood......... whatever
what do you have to trade?
yours scott
Still here?