TOOLS AND THE SHOP > GENERAL TOOL AND MACHINE DISCUSSION
Post all of your latest tool buys here
hickory n Steel:
I was at HD buying some sanding disks and found this Ryobi work light for $30.
After some testing I'm not particularly impressed with it.
280 lumens is adequate and a max 22hour runtime is good, but the led and beam quality aren't great and i think I'd rather have more flood than spot.
I was expecting more of a work light not an oversized flashlight that falls short of even the AAA flashlight in my pocket.
Maybe in time It'll prove to be just fine, but I have so many good quality flashlights and this just doesn't compare to them.
goodfellow:
Found this great bore brush set on Amazon for $20. Steel, Brass, and Plastic brushes make cleaning caliper slide bolt bores a breeze to service. My old set was pretty worn out and many pieces were already discarded over the years.
The wife's Traverse needs new brakes and this will do just fine.
PS -- I have no idea why the pic is rotated. The original image is correct, but the uploaded image posts as rotated --- weird!!
muddy:
--- Quote from: goodfellow on March 07, 2024, 09:16:28 PM ---Found this great bore brush set on Amazon for $20. Steel, Brass, and Plastic brushes make cleaning caliper slide bolt bores a breeze to service. My old set was pretty worn out and many pieces were already discarded over the years.
The wife's Traverse needs new brakes and this will do just fine.
PS -- I have no idea why the pic is rotated. The original image is correct, but the uploaded image posts as rotated --- weird!!
--- End quote ---
Great looking kit Ray! Have a link for that one?
Sent from my twisted mind of the mudman
goodfellow:
--- Quote from: muddy on March 07, 2024, 09:52:16 PM ---
--- Quote from: goodfellow on March 07, 2024, 09:16:28 PM ---Found this great bore brush set on Amazon for $20. Steel, Brass, and Plastic brushes make cleaning caliper slide bolt bores a breeze to service. My old set was pretty worn out and many pieces were already discarded over the years.
The wife's Traverse needs new brakes and this will do just fine.
PS -- I have no idea why the pic is rotated. The original image is correct, but the uploaded image posts as rotated --- weird!!
--- End quote ---
Great looking kit Ray! Have a link for that one?
Sent from my twisted mind of the mudman
--- End quote ---
Here you go Tim -
https://www.amazon.com/dp/B0C49GWHP1?psc=1&ref=ppx_yo2ov_dt_b_product_details
hickory n Steel:
I went to HF after work today and bought the USG 15" end cabinet which I wanted to mount onto the side of my 5 drawer cart.
I wanted the orange one but they only had black and I don't go there very often so I just bought the black one.
If you were okay with it sticking out the front you'd only need to cut one notch for the front corner of the lid, but since I wanted the front even it required a notch at the very front corner and I had to cut off a section of the lip in back to clear the lid ( not necessary if you removed then reattached the lid )
I also took the stupid plastic latches out be they're very hard to operate and make the drawers extremely difficult to open, thankfully they just pop right out.
Navigation
[0] Message Index
[*] Previous page
Go to full version