Garage Gazette
TOOLS AND THE SHOP => MECHANIC HAND TOOLS WE USE => Topic started by: skfarmer on November 18, 2021, 06:06:23 PM
-
like some others here, i am a sucker for the blue handles.
i picked these up today.
-
xlt stands for extreme leverage technology. the pivot pin is very close to the cutting edge for increased leverage. makes sense to me i guess.
the fit and finish seems more than adequate with made in usa, channellock and the model number forged right into the handles. the jaws fit well with no gaps.
what's not to like?
-
Great pliers - and very reasonable compared to most other premium brands. Great score Harlan
-
they will fit well in the blue stable of pliers. i have the much larger version and a similar sized one but these are different enough from either that i think they will come in handy.
i really like this type of nippers/end cutters for cotter pin work. staighten the bent ends and work the loop end back and forth with the curved jaw and even the most stubborn pins give in.
-
they will fit well in the blue stable of pliers. i have the much larger version and a similar sized one but these are different enough from either that i think they will come in handy.
i really like this type of nippers/end cutters for cotter pin work. staighten the bent ends and work the loop end back and forth with the curved jaw and even the most stubborn pins give in.
Yeah, I could see how the curved front on the jaws would work well as a pivot point for stubborn cotter pins.
-
well you answered my question of intended uses. Never used them before. Not good sellers like the rest of the blue handled line up.
Can't go wrong with Channelock IMO, always great bang for the buck
-
ohhh another Channellock I don't need :P
-
I've had my 357's for about 2 years now I think, I used the crap out of them this week and as always they were great.
If I remember correctly I got nine for about $18 at the local hardware because i had some rewards points.
I would not hesitat pay full price for another pair though, such a great tool.
-
they will fit well in the blue stable of pliers. i have the much larger version and a similar sized one but these are different enough from either that i think they will come in handy.
i really like this type of nippers/end cutters for cotter pin work. staighten the bent ends and work the loop end back and forth with the curved jaw and even the most stubborn pins give in.
Yeah, I could see how the curved front on the jaws would work well as a pivot point for stubborn cotter pins.
well you answered my question of intended uses. Never used them before. Not good sellers like the rest of the blue handled line up.
Can't go wrong with Channelock IMO, always great bang for the buck
my larger end cutters are used more for fencing, pulling and cutting barbed wire and pulling staples.
the smaller ones i use more for pulling than cutting actually. as i mentioned, cotter pins. but they alos work great for pulling nails, especially small ones and any small , hard to grip object.
-
they will fit well in the blue stable of pliers. i have the much larger version and a similar sized one but these are different enough from either that i think they will come in handy.
i really like this type of nippers/end cutters for cotter pin work. staighten the bent ends and work the loop end back and forth with the curved jaw and even the most stubborn pins give in.
Yeah, I could see how the curved front on the jaws would work well as a pivot point for stubborn cotter pins.
The other day I was breaking down an old double sided retail book shelf shelf that was constructed with those T head finish nails.
It was mostly made of cheap ply wood so I was able to pry it apart and pull the finish nails right throgh with the 357's.
Just grip and pry, readjust and repeat till it's pulled through.
Pretty effortless to do and sure beats tapping them out some so you can get a grip and pry them out head first.
-
SK you got me I had to pick one up @ Home Depot.
-
ohhh another Channellock I don't need :P
That is a good clue for whoever gets you for Secret Santa. :lol_hitting: