Garage Gazette
TOOLS AND THE SHOP => COMPRESSORS/AIR TOOLS/LINES FILTERS & MISC. => Topic started by: gtermini on January 21, 2019, 04:10:33 PM
-
Finally got around to matching the 3/8 snappy drill I've had and loved for a few years. Snagged a new 1/2" 500rpm reversible Sioux made snappy off da bay for about 35% of retail. Stuck a Rohm single sleeve, ratcheting, keyless chuck and dynaswivel on it to make it match the 3/8ths. I really like these chucks. They grab like crazy and are easy on the hand. For shop use, I prefer the power and compactness of pneumatic tools vs corded and cordless.
(https://i.imgur.com/xAzjf1el.jpg)
3/8ths in a real world action shot
(https://i.imgur.com/elqQ9GFl.jpg?1)
Greyson
-
Very nice. That is a stout side handle to keep from breaking your wrist.
-
Very nice of have the same in green, with a keyed Chuck.
Sent from my XT1710-02 using Tapatalk
-
Good torque from air?
-
Good torque from air?
Yes. It's a 1HP motor.
Greyson
-
That's impressive.
-
They are hungry hungry hippos for air though. CEJN 320 fittings keep all the tools happy and well fed.
Greyson