Garage Gazette
TOOLS AND THE SHOP => MECHANIC HAND TOOLS WE USE => Topic started by: hofferwood on April 16, 2019, 07:09:58 PM
-
I forgot I had this.
-
Great old wrenches Chuck! The classic tapered beam was always very appealing to me
-
Thanks Ray.
What I see as unusual are the sizes-----9/16" and 7/16".
-
Thanks Ray.
What I see as unusual are the sizes-----9/16" and 7/16".
Are you referring to 7/16 being paired with 9/16 or different standard then SAE?
-
Thanks Ray.
What I see as unusual are the sizes-----9/16" and 7/16".
Are you referring to 7/16 being paired with 9/16 or different standard then SAE?
Yup Phil, It's usually 9/16 and 1/2" ----that's all,, just unusual to me-----------I don't get out much---LOL
-
I personally like the 1/2" x 9/16" combo, but having the ends two sizes off makes it easier to distinguish in a tool tray.
Much more helpful with metric wrenches! ;D