Garage Gazette

TOOLS AND THE SHOP => ANTIQUE/COLLECTOR TOOLS/BOXES/HAND ONLY => Topic started by: coolmercury on March 23, 2019, 05:55:35 PM

Title: Need some help, are these DOE Dannialson ??
Post by: coolmercury on March 23, 2019, 05:55:35 PM

I seem to remember someone told me these wrenches were made by Dannialson.  At any rate, they are only marked with the size and controlled steel on one side and forged USA on the other.  I picked up the smallest one the other day and now have five, but what is missing?  Sizes I have are 3/8-7/16, 1/2-9/16, 19/32-11/16. 5/8-3/4 and 15/16-1.  I suspect there may be a 13/16-7/8?

Title: Re: Need some help, are these DOE Dannialson ??
Post by: leg17 on August 28, 2019, 08:49:46 AM

Yes, Danielson made CONTROLLED STEEL

Title: Re: Need some help, are these DOE Dannialson ??
Post by: bonneyman on August 28, 2019, 10:34:40 PM

J.P. Danielson. I don't like DOE's but their Controlled Steel ones I've got a set going. I like their adjustables with the broached hanging hole, too.
Here's the list of sizes from AA - the ones I have are boldened.

5/16 x 13/32
3/8 x 7/16
1/2 x 9/16
19/32 x 11/16
5/8 x 3/4
13/16 x 1
7/8 x 25/32
15/16x1