Author Topic: echo cs-590 timberwolf  (Read 2779 times)

Offline skfarmer

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1846
echo cs-590 timberwolf
« on: September 20, 2020, 04:22:49 PM »
i had some cleanup work to do last weekend and throughout the coming fall. i wanted a bigger saw than i had. i am normally leaning towards stihl as that is what i have had for years. honestly, i couldn't afford what i wanted from stihl and stumbled upon this saw for 399 plus tax with a factory sponsored 3 free chains.. well that alone is the better part of 100 dollar bill. i had to drop 35 bucks for the case out of my own pocket as well.

the echo cs-590 timberwolf is a  no frills  60 ( 59.8 ) cc class saw with a 20 inch bar and  3/8 chain. single bumper spike (an outside spike  is an option i may add), automatic clutch driven oiler for less oil consumption, decompression valve for easier starts and translucent fuel tank for visual fuel level checks.

it gets pretty good reviews but the proof is in the pudding. as you can see it has been used already. i put  about 4 or 5 tanks of fuel through it last weekend. it handles the 20 inch bar quite well and that 3/8 chain really move some material. quite literally, the thing is a beast.  there was about 5 other saws cutting with me. all of them stihl saws and all smaller but hands down the other guys were impressed. i am quite happy with the amount of saw for the money and would make the deal again. even without the 3 free chains.

oh yea, the 5 year warranty doesn't hurt either!
from the ashes shall rise a phoenix

i was here when the hangout turned into mexican food site!

Offline skfarmer

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1846
Re: echo cs-590 timberwolf
« Reply #1 on: September 20, 2020, 04:44:29 PM »
the hands on end. pretty standard. throttle in the handle, simple toggle switch to the left and choke lever to the right. the starter rope is  in the upper left and the center thumb knob is used to access the air  filter. just out of the picture on the left is a decompression button that is near the top handle on top of the cylinder.
« Last Edit: September 20, 2020, 04:47:46 PM by skfarmer »
from the ashes shall rise a phoenix

i was here when the hangout turned into mexican food site!

Offline muddy

  • Hero Member
  • *****
  • Posts: 3483
Re: echo cs-590 timberwolf
« Reply #2 on: September 20, 2020, 05:16:33 PM »
I love no frills machinery. Simpler to get used to, and maintain!

Sent from my E6910 using Tapatalk


Offline fatfillup

  • Hero Member
  • *****
  • Posts: 2554
Re: echo cs-590 timberwolf
« Reply #3 on: September 20, 2020, 06:08:17 PM »
Great write up.

You seem pleased so far

Offline slip knot

  • Hero Member
  • *****
  • Posts: 2593
Re: echo cs-590 timberwolf
« Reply #4 on: September 20, 2020, 06:12:11 PM »
4 or 5 tanks, Man yall was doing some cutting. I've got a 20in echo around here somewhere but I dont go looking for it unless I have to. that thing will wear me out long before it gets tired.

Offline Rusty

  • Administrator
  • Sr. Member
  • *****
  • Posts: 263
Re: echo cs-590 timberwolf
« Reply #5 on: September 20, 2020, 06:16:28 PM »
Echos are surprisingly good saws.  :bravo_2:
"Those wars are unjust which are undertaken without provocation.
 For only a war waged for revenge or defense can be just"

Marcus Tullius Cicero

Offline ron350

  • Full Member
  • ***
  • Posts: 244
Re: echo cs-590 timberwolf
« Reply #6 on: September 20, 2020, 07:41:33 PM »
Good looking saw and good looking case.

Offline goodfellow

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 4340
Re: echo cs-590 timberwolf
« Reply #7 on: September 20, 2020, 08:11:13 PM »
I'm partial to the Echo myself. Great lookin' saw; - hope it provides many years of service for you Harlan.

Offline skfarmer

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1846
Re: echo cs-590 timberwolf
« Reply #8 on: September 20, 2020, 08:32:56 PM »
I really didn't lnow much about them either. My local farm store put in a whole display least year. About 10 different echo saws and an assortment  of trimmers, blowers, edgers, and hedge clippers plus all of the oils, chains  bars, string and assorted bits. I started  doing the homework and heard mostly good stuff.

Maybe we should be calling it shindaiwa?
« Last Edit: September 20, 2020, 09:34:24 PM by skfarmer »
from the ashes shall rise a phoenix

i was here when the hangout turned into mexican food site!

Offline ken w.

  • Hero Member
  • *****
  • Posts: 678
Re: echo cs-590 timberwolf
« Reply #9 on: September 20, 2020, 09:15:13 PM »
I really like my Echo chainsaws. I have a CS-360 arborist saw and a CS-310 . Both run great with little vibration.

Offline skfarmer

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1846
Re: echo cs-590 timberwolf
« Reply #10 on: September 20, 2020, 09:40:37 PM »
4 or 5 tanks, Man yall was doing some cutting. I've got a 20in echo around here somewhere but I dont go looking for it unless I have to. that thing will wear me out long before it gets tired.
I really like my Echo chainsaws. I have a CS-360 arborist saw and a CS-310 . Both run great with little vibration.

yes we did. we had a wood cutting day at the campground we will be at next year. a huge pile of 6-8 foot logs from 3-30 plus inches. about 10 of us spent 6 hours cutting and splitting last saturday.

maybe we need a show us your echo chainsaw or any chainsaw for that matter.
from the ashes shall rise a phoenix

i was here when the hangout turned into mexican food site!

Offline TexasT

  • Sr. Member
  • ****
  • Posts: 367
    • Where I can be found
Re: echo cs-590 timberwolf
« Reply #11 on: September 21, 2020, 02:26:22 PM »
I don't have an echo saw but if I had a saw it would be an echo or redmax. I do however have an echo trimmer, echo blower and and echo tiller and being as they are all over ten yrs and the trimmer being closer to twenty, i think the brand makes excellent equipment.

Rich

Offline bmwrd0

  • Hero Member
  • *****
  • Posts: 608
Re: echo cs-590 timberwolf
« Reply #12 on: September 21, 2020, 08:36:48 PM »

maybe we need a show us your echo chainsaw or any chainsaw for that matter.

That would be awesome. I bet Jabber has some nice saws.