Author Topic: Plug Gap  (Read 4705 times)

Offline pep

  • Hero Member
  • *****
  • Posts: 1179
  • Personal TEXT
Plug Gap
« on: March 25, 2019, 11:04:13 AM »
Change the plugs frequently  .......... cause there is a very nice performance bump when done.

Wondering how many set or even check a plug gap. Thought I'd bring a tool to the table that will not only speed the process. Exact and even gaps are totally repeatable every time.
 A manufacture preset gap will have a range + or - small detail that dose have an impact.
FWIW
Pep
1776 ................... what happened!

Offline Heiny57

  • Hero Member
  • *****
  • Posts: 828
Re: Plug Gap
« Reply #1 on: March 25, 2019, 12:23:47 PM »
I have never seen that before, how does it work?
MAGA

If you can’t fix it with a hammer, it must be electrical.

Online goodfellow

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 4321
Re: Plug Gap
« Reply #2 on: March 25, 2019, 12:53:52 PM »
I have never seen that before, how does it work?

You set the dial to a specific gap width and slide the plug electrode and ground into the gauge and press the handle - bingo!! gap set to whatever you dialed with the gauge. Old School, but it works. Not recommended on iridium or platinum tipped plugs though -- it's very likely you can chip the thin electrode with these tools






Offline pep

  • Hero Member
  • *****
  • Posts: 1179
  • Personal TEXT
Re: Plug Gap
« Reply #3 on: March 25, 2019, 01:01:16 PM »
 Here you go,  set the gap size, open the gap some, then insert plug, close and set gap.

@ Ray LOL yeah that one you have there certainly is old school. I find the gap sizing disk interesting, but limited looking it over.

Pep
« Last Edit: March 25, 2019, 01:18:33 PM by pep »
1776 ................... what happened!

Offline fatfillup

  • Hero Member
  • *****
  • Posts: 2542
Re: Plug Gap
« Reply #4 on: March 25, 2019, 04:22:30 PM »
Have actually sold a few of the gapping pliers.

As to gapping plugs for work, small engines get gapped to 30 and if I am in the shop I will gap them.  On the road, they get eyeballed most times but can't say that I have ever had a problem with a plug gap done by eye but then again, we ain't talking high performance or high rpm

Offline Rusty

  • Administrator
  • Sr. Member
  • *****
  • Posts: 263
Re: Plug Gap
« Reply #5 on: March 25, 2019, 04:48:54 PM »
The gapping pliers are nice. Makes the job quick and easy. I've seen some of the supposedly pre gapped plugs be way off.
"Those wars are unjust which are undertaken without provocation.
 For only a war waged for revenge or defense can be just"

Marcus Tullius Cicero

Offline muddy

  • Hero Member
  • *****
  • Posts: 3467
Re: Plug Gap
« Reply #6 on: March 25, 2019, 05:50:33 PM »
I always check gap before I install new plugs.

Never seen the pliers before.

Sent from my XT1710-02 using Tapatalk


Offline hofferwood

  • Full Member
  • ***
  • Posts: 103
  • It's all good
Re: Plug Gap
« Reply #7 on: March 25, 2019, 06:10:22 PM »
I had a set just like Rays, back in the late '70s, they were in my toolbox----in the trunk of my '68 Roadrunner.

Some SOB decided he wanted it more than me (the Plymouth), never to be seen again----at least by me.   :'(
If it aint broke----fix it till it is-----there's nothing more permanent than a temporary fix.

Offline DeadNutz

  • Hero Member
  • *****
  • Posts: 2985
Re: Plug Gap
« Reply #8 on: March 25, 2019, 10:23:55 PM »
I always check the gap after pulling a plug or putting new ones in as it is habit. I don't have a fancy tool to do it though.

Offline Heiny57

  • Hero Member
  • *****
  • Posts: 828
Re: Plug Gap
« Reply #9 on: March 26, 2019, 05:52:53 AM »
How do they adjust for different lengths of plugs?
MAGA

If you can’t fix it with a hammer, it must be electrical.

Offline geneg

  • Jr. Member
  • **
  • Posts: 83
Re: Plug Gap
« Reply #10 on: March 26, 2019, 07:54:36 AM »
I bought one in the early 80's off the Snap on truck. It came with a disk that went up to .035.  Bought a second disk for wide gap HEI plugs.  Probably not useful for a single, but saved a lot of time on a set of 6 or 8.

Offline pep

  • Hero Member
  • *****
  • Posts: 1179
  • Personal TEXT
Re: Plug Gap
« Reply #11 on: March 26, 2019, 08:29:43 AM »
How do they adjust for different lengths of plugs?

The collar that the plug rest in, flips it is pinned off center, and changes the length.

"Snap on truck. It came with a disk that went up to .035. "

Disk is .085 now
Pep
« Last Edit: March 26, 2019, 08:34:22 AM by pep »
1776 ................... what happened!