Great day!!

[Davethorik]

Opened up Letgo this morning and it started a 3 hour long adventure with 4 stops and some nice stuff.

Stop 1 was the very nice looking Craftsman cantilever box no. 6536. Guy was 59, said he bought it age 16 in 1976. Still has original exterior sticker, and has cut to fit cork matting throughout. Very heavy-duty; I'd guess 15 lbs empty.

Stop 2: JC Penney USA 1/3 hp cast iron bench grinder.

Stop 3: JC Penney USA 1/3 hp cast iron bench grinder. Yes you read right, that makes #2. Different sellers different towns listed the same day within hours of each other lol. Grinders seem to have identical specs but different part numbers. What are the odds??

Stop 4: old Cornwell 3/4 combo wrench, Pexto tinsmith's hammer, large brass mallet, and last but not least a "Germantown Master Lather" lath hatchet that is 100+ years old, made by Germantown Tool Works of Philadelphia.

Total was $75 spent.

[Davethorik]

Here are the rest of the pics.

[goodfellow]

that box is a classic -- congrats on that score!

[Davethorik]

Thanks!

Here's a better shot of the cleaner grinder. It's used but very clean. Both have all parts, wheel guards, face shields, and tool rests. Good cords to boot!

[oldnslo]

Nice score on the tools. If your going to keep the grinders, what I have done is one grinder has the coarse and fine stones, the other has coarse and fine wire brushes.

[Davethorik]

That's the plan, I sold my craftsman block grinders a while ago and I like that these are very heavy for their size. My OCD will be satisfied that they match, as well 

[Elroy]

Thanks!

Here's a better shot of the cleaner grinder. It's used but very clean. Both have all parts, wheel guards, face shields, and tool rests. Good cords to boot!

In Elroy's eye, those bench grinders are Baldors.

[Davethorik]

Thanks!

Here's a better shot of the cleaner grinder. It's used but very clean. Both have all parts, wheel guards, face shields, and tool rests. Good cords to boot!

In Elroy's eye, those bench grinders are Baldors.

I would tend to agree with Elroy, looking at pics online. Awesome I grabbed some good stuff!! Thanks for the ID, Elroy.

[hickory n Steel]

Really awesome cantilever box.

That lathe and plaster hatchet is a nice score too, Germantown used great steel.

[Davethorik]

Thanks, it caught my eye and appears very well made. I doubt the handle is original but it is 100% serviceable. Same with the 2 hammers.

Looked closely at the hatchet, it has 81 points so it is the midsize no. 293 Chicago pattern 19 oz per the ad.

[DeadNutz]

$75 for all that is a great score. The reason those grinders have lasted so long is due to good USA Baldor motors. I like the big brass mallet also and those aren't cheap anymore.

[hickory n Steel]

Thanks, it caught my eye and appears very well made. I doubt the handle is original but it is 100% serviceable. Same with the 2 hammers.

Looked closely at the hatchet, it has 81 points so it is the midsize no. 293 Chicago pattern 19 oz per the ad.

I don't know, looking at the condition of the head I would not doubt if that handle is original.
A shot of the top of the eye will tell but it looks well hung from what I can see, most often people tend to just jam a head down as far as it go and pound in a step wedge or whatever they've got laying around.

[skfarmer]

really nice grinders. that cantilever box is nice. missed a smaller one a while back and regret it. most of them are too large for my needs.

[lauver]

Dave,

That Crafty cantilever box is a real gem; haven't seen one in ages.  That said, if your empty weight estimate (i.e. 15lbs) is correct, and the box was loaded with tools, it could easily weigh 45-50lbs.  That would be a tough lift/carry 

[fatfillup]

Sweet buys

When Elroy first said the grinders looked Baldorish, I was skeptical but upon closer inspection, they may very well be. Or the might be Winsotas (or something like that, Baldor clones but great grinders)