Recently the of light of good fortune shined upon me. Was given a completed torch set. Unloading it discover the cart had real problems, 3 major ones...
1. When tilted back to move, the clearance from the deck to the rear edge of the platform. Is no clearance, will catch on any obstructions, rock, air hose, quarters, dimes you name it. The point being not so great.
2 The whole deal is ridiculously sloppy and flexes ..... real HF quality, today's standard of a measurement of crap tools.
3 One more nasty little event. Knowing I was going to work it over. Removing the tanks, and the regulators. The thing fell backwards and smacked the floor, as the tanks were lifted. Just missing a door, lucky shot for me.
Junk shot
The fix, moved the wheel aft 3 inches, changing the pivot point. Allows more clarence of the rear bottom edge of platform to floor. The larger wheels are decorative for the most part. Stiffened the frame, welded the handle.
So beware of the crappy cart ...............
![Undecided :-\](http://garagegazette.com/Smileys/fantasticsmileys/undecided.gif)
Pep
![](http://1Mods.jpg)