Garage Gazette
TOOLS AND THE SHOP => ANTIQUE/COLLECTOR TOOLS/BOXES/HAND ONLY => Topic started by: bmwrd0 on May 30, 2019, 06:06:31 PM
-
Went to a Barn/Estate sale today as they had pictures of some tools and I had time. The first things I picked up were normal and very cheap, about a buck a tool:
(https://live.staticflickr.com/65535/47968663598_e1d7946c3f_c.jpg) (https://flic.kr/p/2g5PWu7)
Snap-on extension, Craftsman box-head ratchet that needs some work, dividers, Starrett parts, some Vlchek combos, Cornwell flare combo and a Stanley Defiance chisel. But the rest I got will be small projects:
(https://live.staticflickr.com/65535/47968705181_418d015dd4_c.jpg) (https://flic.kr/p/2g5Q9R4)
(https://live.staticflickr.com/65535/47968642627_e34467fd9e_c.jpg) (https://flic.kr/p/2g5PQfx)
Some of the sockets are still usable even, but I will be JAFE juicing the ratchets, adaptors and there is a Craftsman breaker bar in there somewhere. But the tin is still good under the surface rust, and this is why I picked it up:
(https://live.staticflickr.com/65535/47968663003_7062208ee1_c.jpg) (https://flic.kr/p/2g5PWiR)
A thirties Snap-on box for a breaker bar set. I figure for the $20 I spent on everything, I could see about bringing it back to life
-
Heart breaking to see tools in that condition but if you can bring them back and use them then hat's off to ya! ;)
-
Some of those are pretty bad but prime candidates for EvapoRust. If you have never used it I can give you some tips on making it most effective.
-
Some of the sockets are shot, but there are some gems in there; Plomb Los Angeles 8-points, Snap-on ratcheting adaptor, unplated Plomb, an odd screw starter, Craftsman BE ratchet and breaker bar, etc. I have used Evaporust before, but this might take something stronger.
-
Seriously use 1 cup of salt to 1 gal of vinegar it will do all you need and you get both ingredients from the 1$ store.
Soak then in gas first to remove any oil.
-
I was thinking about using the vinegar, but what does the salt do?
-
Dunno but it works so well . Once you've cleaned any oil off....important.
I hit it with a propane torch to burn of any residue then drop em in. Give it the odd shake/stir and let sit for 24 hrs then rinse under hot water the rust washes off like dirt. If there's still some on the part repeat .
I`m sold on this method.
-
I bought #2149 today in Texas and taking it to Oklahoma. Very excited and in excellent condition. Anyone on here a previous owner?
-
I was thinking about using the vinegar, but what does the salt do?
I use a similar salt/vinegar weed killer recipe. I think - big think here - that a small amount of the salt dissociates and produces some free chlorine atoms. When mixed with acid it destroys the rust - much like muriatic acid - but weaker, so safer to use.
You may recall my similar save of an S-K socket box.
-
Boy, looking at that box...Are you sure that's not Aquaman's tool box?
-
Ugh, one more project I need to get back too...