Been driving this 96 half ton since 2012. Fuel pump quit on way to work back in 2015. I discovered previous owner cut an access hole in the box, so putting in a new one was no problem. Couldnt see it due to the bedline. Truck now has 209k and running fine. Has made several 900 mile trips without a problem. A year ago in November drove it into town, ate, then no start. Was 5 degrees and stiff windchill. Had no fuel pressure. so had it towed home. Got a new pump, but wasn't til Feb. got it in, as we had snowstorm one after another. Only scoop out the box so many times til it gets old. New pump, no start, seemed to have fuel pressure. In May, got back at it, and bought a pressure gauge. Pump put out 15psi, not the 45 it needs to run. Can't find reciept. got another pump, NAPA, put it in, ran fine. 45psi at the engine. drove it several hundred miles. Then when 59 miles from home, no start, no fuel pressure. Went back the next day, 30 degrees warmer, and fired right up. Got home, put in replacement pump, got about 250 miles on it, at home, 5 degrees and no fuel pressure. Got 13 volts at the pump plug, so told girlfriend to tap the top of the tank, bingo, 55psi. moved it 50 feet, restarted just fine. Went out next day, cold, no start. First pump was ORiellys, as was second. Now3 NAPA pumps. now looking to see if GM still has a pump for a 96. Getting a little ticked off. Anybody have such a run around?