Garage Gazette
TOOLS AND THE SHOP => GENERAL TOOL AND MACHINE DISCUSSION => Topic started by: hickory n Steel on August 24, 2018, 03:40:11 PM
-
I'll start with a little ratchet I recently dreamt up.
(https://s6.postimg.cc/844kv2f8x/IMG_20180824_131306754.jpg) (https://postimg.cc/image/ug2dogect/)
It's a 4" low profile 1/4"dr teardrop head pocket ratchet.
Call me crazy, but I don't like any of the micro 1/4" ratchets out there.
They're usually bit ratchets which I don't want, they're usually offset which I don't want, and they're usually ugly.