Garage Gazette
TOOLS AND THE SHOP => GENERAL TOOL AND MACHINE DISCUSSION => Topic started by: jabberwoki on November 24, 2020, 08:07:38 PM
-
Needed one to take out some screw in freeze plugs , saw this Jim Dandy old school beaut on fleabay.
-
you win! --- nice
-
I've not seen any bigger! ;)
-
I probably have some set screws that would work with.
-
I like how they show all kinds of bolts it'll remove lol
Sent from the twisted mind of the Mudman
-
That is big,,,,,,,,,,,,,but I had a bigger one :93:
Bought a 2 inch allen wrench. Was 28 inches long. Sold it to a young customer who thought it was cool. I buy most any big tool I can get cheap.
-
I buy most any tool I can get cheap.
there.......fixed it for you! :lol_hitting:
-
Biggest I have is a 17mm, for VW bus oil pans.
Or, in my case for fork tops from mid-'80s Yamaha race bikes.
-
I buy most any tool I can get cheap.
there.......fixed it for you! :lol_hitting:
Lot of truth there :))
-
I buy most any tool I can sell.
there.......fixed it for you! _hitting:
And I fixed the fixing :))
Sent from the twisted mind of the Mudman
-
You guys know me well. My feelings are so hurt I am going to have to go to an auction tomorrow to recover. Likely will need K5 to go along and boost my morale :))
-
k5? more like k nuthin. :))
tell him to stop in some time so we can call k once. :D
why you up so early phil? stuffing the turkey? :hee20hee20hee:
-
Speaking of big stuff, parts store long ago. Countermans name was Del. Someone would ask for the biggest cotter pin you got. Del would ask, 'you sure'? Then he would haul out the big one, toss it on the counter. The customer mouth would open, the pin was over 3 foot long, and 1.5 inches diameter. Story was he picked it up in a ship yard, was good for a lot of laughs
-
I have a 7/8" hex key in a 1" drive socket, got it for Dana 60 kingpins.
-
Pix or it aint true noob :dance:
I`d like to see that.
What brand is it?
-
Pix or it aint true noob :dance:
I`d like to see that.
What brand is it?
That sorta stuff is out there mate.......
(https://uploads.tapatalk-cdn.com/20210124/f706bbb6445eb0d7d3c77ca572fb474a.jpg) but not always bought because there was a need..... this one was in a random purchase of some NOS sockets
-
If TacticalFun got on this thread he would say the mini's are cute. He use some monster hex tools.
-
I like how they show all kinds of bolts it'll remove lol
Sent from the twisted mind of the Mudman
They were showing all the different brands of Allen Head brand fasteners they made, like a mini catalog on the box.
-
Never noticed that a BIC light was 1" wide. Elroy measure an example. Measured .993 :-*
-
Pix or it aint true noob :dance:
I`d like to see that.
What brand is it?
Snap On. I only have it because got lucky on ebay. I'll try to get a pic, and see if I can figure out how to post it.
Edited to add, it's an IMA283. I have a couple of pictures, but where do I upload them?
-
Finally figured out how to upload a picture, I think.
-
There you go ..what a beaut.
-
Looks great. I love me some monster tools