Author Topic: Uh ho! That's not good! (Read 6578 times)

skfarmer · « **on:** October 21, 2020, 11:27:16 AM »

I know what it is a don't like it.

skfarmer · « **Reply #1 on:** October 21, 2020, 01:00:19 PM »

That's a lot of weight to move

skfarmer · « **Reply #2 on:** October 21, 2020, 01:04:02 PM »

That's not gonna work

skfarmer · « **Reply #3 on:** October 21, 2020, 01:04:54 PM »

Out with chrome to fit. But what am I doing?

skfarmer · « **Reply #4 on:** October 21, 2020, 01:09:10 PM »

Shit. More weights just to get to these.

skfarmer · « **Reply #5 on:** October 21, 2020, 01:12:31 PM »

All of those weights and all of those parts to get to what?

Figure it out yet?

DeadNutz · « **Reply #6 on:** October 21, 2020, 01:17:35 PM »

Quote from: skfarmer on October 21, 2020, 01:12:31 PM

All of those weights and all of those parts to get to what?

Figure it out yet?

Air filter?

skfarmer · « **Reply #7 on:** October 21, 2020, 01:28:03 PM »

Should be enough room and loose when I take these out. Yup, 1322 lbs removed to get at 2 bolts

skfarmer · « **Reply #8 on:** October 21, 2020, 01:57:28 PM »

Not quite. Had to make more room. Should be getting ovious now.

skfarmer · « **Reply #9 on:** October 21, 2020, 02:02:08 PM »

Should be real obvious now

skfarmer · « **Reply #10 on:** October 21, 2020, 02:40:16 PM »

Um.....i guess not.

DeadNutz · « **Reply #11 on:** October 21, 2020, 02:50:50 PM »

All that to get the radiator out?

highland512 · « **Reply #12 on:** October 21, 2020, 03:26:40 PM »

I see that your Mrs. holds back bolt containers for you as well.

Any hope for fixing it?

slip knot · « **Reply #13 on:** October 21, 2020, 05:42:16 PM »

you been working it too hard, it needed a break. At least thats what I tell myself when my crap breaks down.

Heiny57 · « **Reply #14 on:** October 21, 2020, 06:43:40 PM »

I thought maybe you were trying to get it back upright.

skfarmer · « **Reply #15 on:** October 21, 2020, 08:24:37 PM »

I have no idea why that happens. It is when I post from my phone . If you click on them they will rotate and enlarge.

muddy · « **Reply #16 on:** October 21, 2020, 09:24:50 PM »

Must of over heated in all that snow! Having it repaired or bending over and getting a new one?

Sent from my E6910 using Tapatalk

gtermini · « **Reply #17 on:** October 21, 2020, 09:28:01 PM »

Well that sucks. I always liked how JD made their radiators come out the side, it's almost like they knew people would have to work on them.

If the local shop can't fix it, call Radiator Supply of Oregon. They always surprise me on the low side for replacement prices.

skfarmer · « **Reply #18 on:** October 21, 2020, 09:35:57 PM »

Quote from: highland512 on October 21, 2020, 03:26:40 PM

I see that your Mrs. holds back bolt containers for you as well.

Any hope for fixing it?

dropped it at the radiator shop this afternoon. he is going to pull the top tank off. if the core is good he will clean, refold and resolder it. a few hundred bucks

if not he is going to remove the top and bottom tanks and put a new core in it . that is a little more pricey at about 1250 bucks per his quote.

my other option is used. it would be pressure tested and repaired for a grand and my old core or new genuine cat for 2550.

i am more comfortable with either repair to mine than the used/repaired route.

highland512 · « **Reply #19 on:** October 22, 2020, 07:39:44 AM »

Quote from: skfarmer on October 21, 2020, 08:24:37 PM

I have no idea why that happens. It is when I post from my phone . If you click on them they will rotate and enlarge.

Are you using an Iphone? I had this problem while using my Iphone so I would upload the pictures upside down and they would post correctly. It has something to do with microsoft intentionally not playing nice with apple's software.

skfarmer · « **Reply #20 on:** October 22, 2020, 08:20:50 AM »

android

skfarmer · « **Reply #21 on:** October 23, 2020, 03:24:12 PM »

Got the word. New core is ordered.

skfarmer · « **Reply #22 on:** October 30, 2020, 08:33:11 AM »

Here we go.

skfarmer · « **Reply #23 on:** October 30, 2020, 05:11:32 PM »

Didn't work on it all day but most of it.

skfarmer · « **Reply #24 on:** October 30, 2020, 05:21:27 PM »

The hood is shut. Glad to be done. I had the shingles and flu shot yesterday. Both arms hurt and feel generally crappy. Just like they said I probably would.

goodfellow · « **Reply #25 on:** October 30, 2020, 05:59:17 PM »

Lookin' good Harlan. Job well done!

slip knot · « **Reply #26 on:** October 30, 2020, 07:30:44 PM »

Thats quite the job for a radiator R&R.

skfarmer · « **Reply #27 on:** October 31, 2020, 08:57:39 PM »

Quote from: slip knot on October 30, 2020, 07:30:44 PM

Thats quite the job for a radiator R&R.

well i was beat up after the project. yes there was shit ton of heavy lifting but as it turns out what really kicked my ass was the shots.

i came in last night, took a shower, put my jammies on and crawled to the couch by 6. had something to eat around 7 and was back to the couch. seems after reading the bad side effects of shingles and flu vaccines that i had every one. fever, chills, nausea, bruising, muscle soreness, headache etc. i do npt recomend getting the 2 vaccines together. i hardly moved til almost noon today.

coolmercury · « **Reply #28 on:** November 01, 2020, 07:45:16 AM »

Yes, you made the same mistake that the wife and I made with taking both shots the same time. In our case my wife had the same effect that you did and I only had some soreness but nothing else. However, we would not suggest others take both shots at the same time.

muddy · « **Reply #29 on:** November 01, 2020, 04:31:06 PM »

Where was the boy to help with the heavy lifting?!

Good to see it it up and running.

Sent from my E6910 using Tapatalk

News:

Author Topic: Uh ho! That's not good! (Read 6578 times)