Don't know much about FELs, but sure do love my forklift
And I know you know pressure washers. What is the least pressure out put a 3k psi pump can be turned down to/operate at?
Have vinyl siding needs a little clean up, want to use water, without a chemistry cleaner.
Thanks in advance
Pressure can be tuned down to hose garden hose Pressure
4ways to control pressure
1. Step back. Pressure on surface drops dramatically over distance
2. If it is a gas engine, slow down the motor. It will pump less water and pressure will drop
3. Use a nozzle with a bigger hole. This will also drop pressure without dropping water volume. This is my preferred method
4. Turn the unloader knob counter clockwise, pressure will drop as will volume. Least favorite method as folks will overadjust the unloader when raising pressure causing too high of spike pressure when trigger is shut off
Note, it takes more pressure to clean if you don't use detergent and it is harder on your siding