Garage Gazette
TOOLS AND THE SHOP => ANTIQUE ELECTRIC/AIR TOOLS => Topic started by: DeadNutz on August 26, 2018, 05:32:56 PM
-
Here are some of my vintage power tools.
Craftsman 1/4 drill 2250rpm and looks like a date of 4-58 which makes it less than 2 years younger than me. $5, works great.
Power House 3/8" drill, $2, works great.
These came from an estate sale of a fellow who made clocks.
-
A 1/4" Hercules drill with a Portalign drill guide from the same sale, $2.
The first power tool I bought in 1978 was this Montgomery Wards sabre saw. I had to build a small doghouse using scrap 1x lumber and I couldn't afford a circular saw so I went with this. Still works great and I wonder who made it?
-
A 1/4" Hercules drill with a Portalign drill guide from the same sale, $2.
The first power tool I bought in 1978 was this Montgomery Wards sabre saw. I had to build a small doghouse using scrap 1x lumber and I couldn't afford a circular saw so I went with this. Still works great and I wonder who made it?
The Hercules was made by Pet tools, the jigsaw was made by McGraw-Edison.
-
Found this Craftsman sabre saw with metal case, earlier this year, works great, replaces one that I bought used 35years ago.
-
Interesting that you guys call these sabre saws, I call them jigsaws.
Is that regional or something ?
-
My late FIL Dunlap chromed 1/4"er drill is a show stopper.
-
Thats a beauty looks like it's from a Buck Rogers movie.
-
Thats a beauty looks like it's from a Buck Rogers movie.
Thanks! Someone asked if it was available for sale, so, I asked the wife (as it was her fathers). The look I got said I would be sold before that thing! :-\
-
I'll bet she wasn't keen on the idea.
For the record I've been on the receiving end of that look.
-
I'll bet she wasn't keen on the idea.
For the record I've been on the receiving end of that look.
When did my wife give you that look? :o
-
Here's my Shop Craft 1/4"er. Don't know if it qualifies for vintage (prolly 60's or 70's) but it's the best dog gone drill I've ever had.
Been on the look out for it's 3/8" brother for 5 years.
-
Here's my Shop Craft 1/4"er. Don't know if it qualifies for vintage (prolly 60's or 70's) but it's the best dog gone drill I've ever had.
Been on the look out for it's 3/8" brother for 5 years.
I had a 3/8 one, but I sold in a huge lot of vintage power tools.
-
I'll bet she wasn't keen on the idea.
For the record I've been on the receiving end of that look.
When did my wife give you that look? :o
My wife shops at the same stink eye look store as yours. She can even give it to me over the phone.
-
I'll bet she wasn't keen on the idea.
For the record I've been on the receiving end of that look.
When did my wife give you that look? :o
My wife shops at the same stink eye look store as yours. She can even give it to me over the phone.
Now that's funny! :))
-
I see you can relate.
-
My corded drill wouldn't really count as vintage because it's from the late 70's to early 80's, but when I picked it up from the flea market the guy had this awesome beast of a Thor that I really wish I would've picked up but it was more than I wanted to spend when the 3/8 Craftsman is just what I needed to replace my broken Skill but I'm sure it was well worth it.
That Thor really was a big ol beast of a drill and it was heavy too, I don't have the arms for such a drill anyways so I guess its best I didn't take it home.
-
I'll bet she wasn't keen on the idea.
For the record I've been on the receiving end of that look.
When did my wife give you that look? :o
My wife shops at the same stink eye look store as yours. She can even give it to me over the phone.
Now that's funny! :))
Shoot, that's nuthin fellers, my wife taught your wives that look! The women in the wife's family are known far and wide for their " Hairy Eyeball" Just look up "Hairy Eyeball in the dictionary and you will see a group shot of all the split tails in my wife's family looking back at you! Ya, seriously! :))
-
My two Craftsman 3/8" drills. The older one is probably 70's, the later one is probably 80's or later.
-
The early one is definitely 70's and/or early 80's. That drill was at one time Sears' "Bread and Butter" drill. They sold millions of them, and they were excellent quality.
Back in the early 2000's they could be had for just a few bucks at garage and yard sales, but these days they seem to be a bit more rare, and they are starting to have some collector's value. Last one I saw in mint condition w/ original box at a Yard sale was almost $30. I should have snagged it, but am already swamped with more vintage corded drills than I know what to do with.
-
I'll bet she wasn't keen on the idea.
For the record I've been on the receiving end of that look.
When did my wife give you that look? :o
My wife shops at the same stink eye look store as yours. She can even give it to me over the phone.
Now that's funny! :))
Shoot, that's nuthin fellers, my wife taught your wives that look! The women in the wife's family are known far and wide for their " Hairy Eyeball" Just look up "Hairy Eyeball in the dictionary and you will see a group shot of all the split tails in my wife's family looking back at you! Ya, seriously! :))
OK, UB, when I come to Kansas City to visit Epstein's I won't come by your house. We'll have to meet down the road at a pancake house or something. I don't think I could survive a Hairy Eyeball! :-\
-
I'll bet she wasn't keen on the idea.
For the record I've been on the receiving end of that look.
When did my wife give you that look? :o
My wife shops at the same stink eye look store as yours. She can even give it to me over the phone.
Now that's funny! :))
Shoot, that's nuthin fellers, my wife taught your wives that look! The women in the wife's family are known far and wide for their " Hairy Eyeball" Just look up "Hairy Eyeball in the dictionary and you will see a group shot of all the split tails in my wife's family looking back at you! Ya, seriously! :))
OK, UB, when I come to Kansas City to visit Epstein's I won't come by your house. We'll have to meet down the road at a pancake house or something. I don't think I could survive a Hairy Eyeball! :-\
You can park off of the alley and I will slip you into the shop when the coast is clear! LOL
Not just "The Hairy Eyeball", but "The German/Irish Hairy Eyeball" which is indescribably bad. The MIL holds classes for the young up and coming split tails in the family weekly so that they are nothing but teeth and hair by the time they come of age with the full ability to strike terror into the hearts of most men, especially the young and unprepared. Fortunately for me I was seasoned beyond the reach of mere mortal female efforts from a lifetime of case hardening by my old man, especially grumpy and cranky by the time he was thirty and as such unfazed by all Hairy Eyeball efforts, regardless the caliber! Anyway, in training from infancy each year of age seasoned me crankier and crankier as to be totally impenetrable to any and all Hairy Eyeball attacks, even from the old MIL, "The Grand High Priestess of the Hairy Eyeball' which is what all of those younger refer to her as in hushed and reverent tones....... :))
-
Youse guys have infected me with the vintage corded tool disease. I picked these up in a $5.00 box lot over the weekend. The one at the top is a Craftsman the lower one is a Fairchild.
-
Those are very Mr Mercury!
-
Youse guys have infected me with the vintage corded tool disease. I picked these up in a $5.00 box lot over the weekend. The one at the top is a Craftsman the lower one is a Fairchild.
Damn -- you did great on that deal. They're both keepers. Fairchild brand is new to me -- can you please show a close-up on the ID Plate --
-
Cannot show the ID plate as it wraps around the drill and pictures don't come out. So, here it is: Fairchild Made in U.S.A., Model F149, Serial No. 123283,110-120V, AC-DC, For service return to Fairchild Industries, Burlington Vermont USA. What is the deal on the ability to use AC or DC? ???
-
Cannot show the ID plate as it wraps around the drill and pictures don't come out. So, here it is: Fairchild Made in U.S.A., Model F149, Serial No. 123283,110-120V, AC-DC, For service return to Fairchild Industries, Burlington Vermont USA. What is the deal on the ability to use AC or DC? ???
Thanks -- I had a hunch it was Fairchild Industries.
It's called and AC/DC universal motor -- uses special winding in the stator.
-
Cannot show the ID plate as it wraps around the drill and pictures don't come out. So, here it is: Fairchild Made in U.S.A., Model F149, Serial No. 123283,110-120V, AC-DC, For service return to Fairchild Industries, Burlington Vermont USA. What is the deal on the ability to use AC or DC? ???
Thanks -- I had a hunch it was Fairchild Industries.
It's called and AC/DC universal motor -- uses special winding in the stator.
All corded power tools can run on dc as well as ac.
-
All corded power tools can run on dc as well as ac.
Really? I never knew that. Can you explain that, or provide a link that does?
-
All corded power tools can run on dc as well as ac.
Really? I never knew that. Can you explain that, or provide a link that does?
https://www.allaboutcircuits.com/textbook/alternating-current/chpt-13/ac-commutator-motors/
-
My father's Wolf 1/2" General Duty Drill, made by Wolf Electric Tools Ltd, London England. I still use it when I absolutely, positively have to make a hole in something. I can't find much about this drill, or the Wolf company in general, I suspect it is early 60's. It has incredible torque. It has twisted itself out of my hands a couple of times and bitten me once. I had a 2.5" hole saw in it drilling a hole in a bull bar. It caught and smashed my hand against the bull bar mount. I thought I had broken bones in my hand but luckily only bruised it badly!
-
That Wolf drill looks like a beast for sure.
-
All corded power tools can run on dc as well as ac.
Really? I never knew that. Can you explain that, or provide a link that does?
https://www.allaboutcircuits.com/textbook/alternating-current/chpt-13/ac-commutator-motors/
Thanks!
-
Here is another old one given to me by a friend. It works but don't plan on using it. No data plate, but it has a big CP on it which may be Chicago Pneumatic??
-
Here is another old one given to me by a friend. It works but don't plan on using it. No data plate, but it has a big CP on it which may be Chicago Pneumatic??
I had a Chicago Pneumatic air ratchet in the early 80's with a logo like that. Very nice user.
-
Here is another old one given to me by a friend. It works but don't plan on using it. No data plate, but it has a big CP on it which may be Chicago Pneumatic??
I had a Chicago Pneumatic air ratchet in the early 80's with a logo like that. Very nice user.
CP for sure, but I cannot see that thing as being any newer than the 60's at most. No way the 1980's for sure.
-
Here is another old one given to me by a friend. It works but don't plan on using it. No data plate, but it has a big CP on it which may be Chicago Pneumatic??
I had a Chicago Pneumatic air ratchet in the early 80's with a logo like that. Very nice user.
CP for sure, but I cannot see that thing as being any newer than the 60's at most. No way the 1980's for sure.
Yeah, after posting that I realized the way I phrased it made it sound like the drill was 1980's. Definitley not 80's date - just meant the logo reminded me of the early 80's ratchet I had. Which was a very solid tool.
This drill being older is probably even more solid. Sorry for my bad writing.
-
That drill looks more like 1930's era to me --
-
That drill looks more like 1930's era to me --
Might be, never seen an electric CP tool myself, only air.
-
I would not want to use it all day, weighs just short of 5 pounds.
-
Here is another one, I can date this one as I bought it new in 1952. This proves I'm old as dirt. It is a Millers Falls heavy duty sander which I used on many cars. It is no lightweight.
-
Takes a man to run that ol MF! Like the old B&D Wildcat angle grinders.
-
THAT is a true keepsake! That grinder is heavy duty industrial goodness.
-
Millers Falls was a great company that made lots of good tools.
-
Looks like you made a good investment on that one.
Seriously though it is a testament to a great tool to last a almost 70 years and it's really cool looking.