Odds & ends, after getting the grinder set up, went back to work on the belt sander mod. I raised the platen several inches so the work piece will clear a boss on the right side of the transport.
Reason for this when rounding corners. I must to flip the work piece to get the other end. The problem in doing that is the corners are hard to duplicate. The last part of the platen mod I can knock out today. It will have a 2 position hard adjustment 90* & 45*, the most common.
Always one more thing, hoist it into the air and cut the casters off, they are awful. Also the platen being 6 inches higher it occurred to me, what goes up must come down. That will be next, also need to take a trip over to the LWS, need shielding gas for both welders. Tig is almost empty, mig down but not out, so swap both.
Pep